Home > Products > Grinding Rods
  • Steel Grinding Rods
  • Steel Grinding Rods
  • Steel Grinding Rods
  • Steel Grinding Rods
  • Steel Grinding Rods

Steel Grinding Rods

  • Steel Grinding Rods
  • Steel Grinding Rods
  • Steel Grinding Rods
  • Steel Grinding Rods
  • Steel Grinding Rods

Inquire Now None

Product Description

Currently, most of the enterprises utilize the round bar steel rolled by the steel mill as the steel grinding rod directly. The round bar steel has very low hardness of only 12HRC to 25HRC, and the internal stress, leading to broken damage easily and low wear resistance property. Meanwhile, the round bar steel comes with some defects such as loose and not compact internal structure. Just because of that, using the round bar steel for grinding would cause a series of problems such as large wear, easily bending, breaking, winding, two tapering ends, low productivity, failing to reach the expected qualified rate, heavy workload of the follow-up magnetic separation process, etc.


Features


1.The wear resistant effect of the new-type alloy wear resistant steel grinding rod is 1.5 to 2 times stronger than that of the rolled steel bar. Marked by excellent wear resistant property, the product can save a lot of cost for the customer.

2.It is manufactured by using the latest production method. The dimension and the specification can be adjusted in accordance with the requirements of the customers. The largely improved flexibility can save the unnecessary waste.

3.The product can serve for a longer time, economize the production cost and mitigate the labor intensity of the workers. Moreover, it eliminates the need for stopping the rod mill to add the new steel grinding rod every day, which is conducive to largely enhancing the productivity.


Our domestic clients are full of praise for the product. Our product order process would follow the steps below.

1.Communicate with the customer to understand the requirements of customers to the product regarding length, diameter, quantity, etc.

2.Order the raw material from the steel mill.

3.Carry out the inspection for the incoming raw material.

4.After being inspected to be qualified, the raw material is processed with professional quenching and high temperature tempering, heat treatment, straightness adjusting, and others by using the professional equipment and technology.

5.Inspect the finished steel grinding rod about the hardness, impact value, drop test, etc.

6.After being approved, all the finished products are stored into the warehouse for delivery.


We manufacture the product with the length of 2m to 6m and the diameter of 40mm to 140mm. The data is just for reference. The product can also be customized. By virtue of many years' experience in researching, developing, and manufacturing the refractory material, we devote ourselves to producing the high-class wear resistant product for the rod mill user.


After years of research and development, we finally develop the new-type steel grinding rod successfully. The newly developed product is characterized by low wear, unique chemical composition, high hardness of 45HRC to 55HRC, and strong toughness. Meanwhile, via the quenching and high temperature tempering treatment, the internal stress is removed. The product has good straightness, and won't break, bend and come out with two tapering ends. Its comprehensive effect is 1.5 to 2 times of that of the round bar steel. The economic benefit is much in evidence.

The steel grinding rod is the optimum choice for the enterprises using the rod mill and the coal mill, such as cement plant, electric power plant, mine, quartz sand plant, silica sand plant, sand aerated industry, coal chemical industry, gas concrete plant, etc. So far, it has been operated into over ten countries and regions, and obtained the unanimous approval from the users.


Product Quality Management

1. Production Process


Raw Material Inspection - Blanking - Burr Grinding - Intermediate Frequency Furnace Heating - Straightening - Quenching Treatment - Tempering Treatment - Inspection - Packaging


2. Mechanical Properties Table (HRC)



Diameter (mm)Surface HardnessImpact Test (Ak)Tensile Strength (MPa/mm²)
φ40-14045-55≥12≥1000



3.Product Quality Inspection Provisions



a.The blanking of the steel grinding rod is implemented via the sawing machine. The dimensional tolerance would abide by the requirements of the order. After the implementation of blanking, the two ends of the raw material are polished into the R arc via the polishing machine.

b. The surface of the product for the rod mill cannot have the crack, overburning and fissure visible to the naked eyes.

c. The nonstraightness of the product is less than 0.2%. The diameter tolerance ranges from +0mm to -1.5mm. The length tolerance is from +0mm to -25mm. The fracture should be less than 3%.

d. When inspecting the nonstraightness, the personnel select 5 products randomly from the products of each work shift. Put the product onto the straightened steel shelf with one end aligning with the steel shelf. Then, measure the distance from the other end of the product to the straightened steel shelf. Each product needs to be rotated for at least three times.


5.Product Acceptance


a. The quality and the dimension of the steel grinding rod manufactured by each work shift are strictly inspected in line with the above standard. Only after passing the inspection can the product be stored into the warehouse.

b. Five products are randomly selected from the products of each work shift for hardness inspection. If there is one unqualified product, the re-inspection is conducted by choosing the product with the amount doubled. If there is still the unqualified one, and the average value of all the hardness values is compliant with the hardness requirement, then, we can say this batch of products is qualified. Otherwise, this batch of products is considered below the standard.


Related Names


Rod Mill Grinding Media | Wear Resistant Metal Rod | Solid Milling Media



Hot Products

Patented Automatic Steel Grinding Ball Production Line Steel Grinding Rods Cast Iron Grinding Balls Forged Steel Grinding Balls

Request a Quote

Product Name: Steel Grinding Rods

Contact Person:

Tel:

Company Name:

Fax:

E-mail:

Postal Address:

Your Inquiry:

CAPTCHA:

Contact Us

Shandong Huamin Steel Ball Joint-stock Co., Ltd.

Tel: +86-531-8380 9606

Fax: +86-531-8380 9606

E-mail: moqiu@hmsteelball.com

Skype: Cideryang

Copyright © Shandong Huamin Steel Ball Joint-stock Co., Ltd. All Rights Reserved.

Technical Support: Reanod

FOLLOW US

Top